Five cultivation and processing CAD blocks: a 96x48in rolling grow bench with its flood-tray lip and the roller tubes under it, a 60x30in drying rack on castors with eight tier bays, a 72x36in trim table seated from both long sides, a 96x36in packaging line with its staging shelf and conveyor, and a 36x45in tacky mat for the airlock. Each is drawn as the fixture it is rather than as the labelled rectangle it replaced - free to download as DXF.
5 blocks, 5 downloads on this page. DXF R2018, drawn in inches. Free, no signup.
DWG (R2000, converted from the DXF). PNG is the plan-view preview.
| Plan footprint (W x H) | 96in x 48in |
|---|---|
| Units | inches |
| DXF version | R2018 |
| Insertion datum | near-left corner of the bench |
| Parameter | Default | Range / options |
|---|---|---|
| Length | 96in | 48in–144in |
| Width | 48in | 24in–72in |
| Rolling | true | true / false |
| Plan footprint (W x H) | 60in x 30in |
|---|---|
| Units | inches |
| DXF version | R2018 |
| Insertion datum | near-left corner of the rack (air must reach all four faces, so it stands free rather than against a wall) |
| Parameter | Default | Range / options |
|---|---|---|
| Length | 60in | 36in–96in |
| Width | 30in | 18in–48in |
| Tiers | 8in | 4in–12in |
| Plan footprint (W x H) | 72in x 36in |
|---|---|
| Units | inches |
| DXF version | R2018 |
| Insertion datum | back-left corner on wall line (both long sides are seated, so the table faces the room on both rather than a wall) |
| Parameter | Default | Range / options |
|---|---|---|
| Length | 72in | 48in–120in |
| Width | 36in | 24in–48in |
| Seats | 4 | 2–8 |
| Plan footprint (W x H) | 96in x 36in |
|---|---|
| Units | inches |
| DXF version | R2018 |
| Insertion datum | back-left corner on wall line (staging at y=0, working edge at +Y) |
| Parameter | Default | Range / options |
|---|---|---|
| Length | 96in | 48in–144in |
| Width | 36in | 24in–48in |
| Stations | 3in | 2in–6in |
| Plan footprint (W x H) | 36in x 45in |
|---|---|
| Units | inches |
| DXF version | R2018 |
| Insertion datum | near-left corner of the mat (lies on the floor) |
| Parameter | Default | Range / options |
|---|---|---|
| Width | 36in | 18in–48in |
| Depth | 45in | 24in–60in |
| Layers | 30in | 15in–60in |
Standards are listed for drafting context only. A symbol drawn to a convention is not a compliance determination - verify against the governing code and the specified product. See the license and terms.
Grow bench, drying rack, trim table and packaging line, each with the aisle its own room states. Open one in the editor or take the DXF.
Every category, every MEP orientation, DXF R2018, sorted into folders. Tell us where to send it and the download starts immediately.
If nothing happened, click here to grab the ZIP.
